EPS sandwich wall panel material

Wall panel Structure
Sections are made from two materials-EPS (expanded polystyrene) coated fiberglass reinforced mesh as the insulating wall core, and integrated galvanized steel construction studs for strength. The surface of the sections can have stucco, wall covering tiles or coating applied directly on site, or at the factory, Flame resistant EPS core have such characteristics of light weight, heat insulation and wound insulation, if could be grooved for wire and pipe. Integrated galvanized steel studs give the system enough strength, and ensure structure could be assembled easily and quickly to save your time and cost.Wall panel Structure
Sections are made from two materials-EPS (expanded polystyrene) coated fiberglass reinforced mesh as the insulating wall core, and integrated galvanized steel construction studs for strength. The surface of the sections can have stucco, wall covering tiles or coating applied directly on site, or at the factory, Flame resistant EPS core have such characteristics of light weight, heat insulation and wound insulation, if could be grooved for wire and pipe. Integrated galvanized steel studs give the system enough strength, and ensure structure could be assembled easily and quickly to save your time and cost.
Connection way with the floor
From a prepared footing, the aidmer system is simple, easy and quick to install. As a steel reinforcement type project, fastense are widely used in the construction, and are readily available if projects require additional parts. We will supply detailed constructions manual according to your projects.
Wall panel connection
In the reasonable span you only need to use L-shaped brackets or angle iron to connect with floor and roof system. There are connection-pegs or rabbets at the edge of each panel, it is easy to install by bonding glue. Our systems utilize a single, un-seamed block of EPS for corner or T-shaped connecting sections, eliminating joints at these crucial points that plague other panel style systems. Wall series is a fully structural, insulated system of factory made sections that are easily to assembled on site. Three workers are enough for whole construction, and only need 1 / 3 time. You can dramatically reduce the time to frame and insulate.